✔ Standard Resistor Color

Standard Resistor Color

- June 14, 2019

The resistor color code calculator decodes and identifies a value and tolerance of 4 band wire wound resistors. In the case of 5 band and 6 band resistors the first three bands indicate the significant digits and the fourth band indicates the multiplier.

Vintage Resist O Guide For Resistor Values Rma Standard Color Code

Resistor Color Code

Solved The Standard Resistor Color Code Table Temp Coef

In the case of a 3 or 4 band resistor the first two band indicate the significant digits and the third indicates the multiplier.

Standard resistor color. They will either have 4 bands or 5 bands. Practically all leaded resistors with a power rating up to one watt are marked with color bands. This chart shows you how you can read the resistor color bands.

The coding is defined in the international standard iec 60062. Resistor values are often indicated with color codes. The warnings are there for your information only and do not always imply that the resistor is was read the wrong way see the notes below.

Resistor color code chart and standard resistor values resistor values are read starting from the line closest to the end of the resistor. More online conversion calculators at digi key. 4 band resistor color code calculator and chart digikey electronics.

The left hand or the most significant coloured band is the band which is nearest to a connecting lead with the colour coded bands being read from left to right as follows. The resistor colour code system is all well and good but we need to understand how to apply it in order to get the correct value of the resistor. Our color code calculator runs this check automatically for you and if the result is not a standard value it will display a small tip.